This is a 12' hose with a built in regulator that will connect the Mr. Heater Big Buddy to a twenty pound propane tank. The regulator on this hose allows the hose to bypass the regulator in the Big Buddy by connecting to the quick-disconnect fitting on the Big Buddy instead of the screw-in connection. This hose gives you 1/2 PSI through the hose at any given time instead of 100 PSI that other hoses provide. This provides much safer conditions should a leak in your hose occur.
This 12-foot hose assembly is one of Mr. Heater's most popular hoses. It connects appliances designed for disposable propane cylinder to a 20-pound cylinder. It includes a hand tighten swivel on both ends. This hose can be used with Mr. Heater's Portable Buddy and Heater/Cooker.
This Mr. Heater 9,000 BTU propane hose assembly F273701 connects appliances designed for disposable propane cylinders to a 20-pound cylinder. It is one of Mr. Heater's most popular hoses and can be paired with the Portable Buddy and Heater-Cooker, which provide safe, portable heat indoors. This propane hose has a hand-tightened swivel on both ends and measures 5 feet long. It is backed by a 1-year limited manufacturer's warranty.
This 15' propane appliance extension hose assembly has 1/4" male pipe thread x 1/4" female pipe thread. Used as an extension hose for portable propane appliances.
This 12' NG patio hose assembly has a 3/8" female pipe thread x 3/8*' male flare quick connect/disconnect with dust plug and cap. Most commonly used to connect NG or LP appliances to an existing low pressure supply.
This is a 10-inch long green hose for use with the mh9b portable buddy and mh18b big buddy. The unique green hose material does not leach oil into the fuel stream. Therefore it does not require use of the f273699 fuel filter that the f273701 & f273702 hoses require. Hands tighten swivels on both ends.
3/8" male pipe thread x 3/8" female flare. Most commonly used to hook a low pressure regulator to an appliance.
1/4" male pipe thread x 3/8" female flare. Replaces most hose assemblies between regulator and fish cooker/smoker, torches, or other appliances.
3/8" male pipe thread x 3/8" female flare. Most commonly used to hook a low pressure regulator to an appliance.
Top Search
Last Search
